毕业论文移动版

摘要21世纪以来，随着国家国民经济的不断提高，人民的生活水平得到了很大的提升，从生活的各个方面都可以看出。衣食住行，前两个方面已经不是我们生活消费的重点了，“住”暂且不谈，在“行”方面，由于我国工业在不停的发展，汽车行业也迎来了发展的契机，汽车的数量也逐年增多，而与之相关联的轮胎拆卸机也得到了飞速的发展。但是，由于我国与国外在轮胎拆卸机方面的技术水平还是使用寿命差距都较大，因此，设计一款自动化程度高，质量优良的拆卸机也成为我国行业内的必然要求。本次设计的拆卸机将拆胎与装胎融为一体，大大减少了从业人员的时间成本，而且产品价格低廉，质量可靠，可以得到中小型修理厂的青睐。76453

毕业论文关键词：轮胎拆卸机  自动化  气动

Design of Semi-Autmatic Tire-Installed Machine

AbstractSince the 21st century, with the continuous improvement of the national economy, people's living standards have been greatly improved, can be seen in all aspects of life。 Basic necessities of life, the first two aspects of our lives is not the focus of the consumer, "live" aside, the "line", since our industry in constant development, the automotive industry has also ushered in development opportunities, the number of cars also increasing year by year, and associated with a tire removal machine has been rapid development。 However, since China and abroad in terms of tire removal machine technology are large gaps still life, therefore, the design of a high degree of automation, good quality removal machine has become an inevitable requirement of the industry。 The design of the machine disassembly Tire and tire fitting integration, greatly reducing the time cost of employees, and low prices, reliable quality, you can get the favor of small and medium sized repair shop。

Key words: tire-entry   automation  pneumatic

目    录

摘要 I

Abstract II

目录 III

1绪论 1

    1。1选择本课题的目的和意义 1

    1。2车轮拆卸机的历史演进和方向 2

2拟定设计方案 4

3确定主要参数 6

    3。1主要技术参数的内容 7

    3。2主要技术参数的确定 7

4选择电机 9

    4。1确定电机的类型及结构型式 9

    4。2选择电机容量 9

    4。3选择电机转速 9

5设计传动机构 10

    5。1计算传动装置总传动比和分配各级传动比 10

    5。2 V带传动的设计计算 11

    5。3主轴的设计计算及强度校核 13

    5。4气动控制系统设计 15

6夹紧机构的设计 18

7六方杆的锁紧设计 19

8设计拆装头 20

9设计机身 20

10机器的安装顺序和操作方法 (责任编辑：qin)