毕业论文移动版

摘要船舶工业是为海洋运输、海洋开发及国防建设提供技术装备的综合性产业，是我 国制造业不可或缺的一部分。近十年来我国船舶行业发展迅速，但是与欧美日韩等相 比仍有不小差距，而制约我国船舶工业发展非常重要的一点就是船舶配套产业的落 后。船舶辅机总产值占船舶配套业产值的一半左右，而起锚机作为船舶辅机的一种， 对船舶的安全运航有重要影响。82694

本文主要针对一种φ46 船用电动起锚机进行研究。运用机械设计及结构力学等 知识，对起锚机的机械结构进行设计研究；然后利用电气控制原理，绘制电气控制原 理图，实现起锚机机电一体化；之后建立起锚机三维模型，通过运动仿真和有限元分 析，验证结构强度并对其进行优化；最后编写起锚机制造工艺与安装调试说明书。研 究主要内容如下：

1。主要阐释了起锚机的总体设计方案，包括起锚机的机械系统和电气控制系统的 设计。机械系统主要包括四大部件：传动装置、卷筒轴装置、刹车装置和离合装置， 为之后的三维建模做准备；电气控制系统主要为实现三速电动机的高低速控制。

2。主要对机械结构进行设计校核。在机械结构设计过程中，将设计与校核融为一 体，对主要受力零部件进行受力分析与强度校核，同时对零件尺寸进行优化。

3。借助 SolidWorks 软件进行建模与有限元分析，对其进行应力分析、变形分析， 与之前的理论计算进行对比，确定最终结构方案。

4。编写制造方案与安装使用说明书。对关键零部件编写加工工艺卡，并编写起锚 机的使用与维护手册。

毕业论文关键词：电动起锚机；方案设计；结构设计；有限元分析；使用说明；

Abstract Shipbuilding industry is a comprehensive industry and technical equipment for shipping and marine development and the defense, is an indispensable part of the manufacturing industry in China。 In the past decade, China's shipbuilding industry has developed rapidly, however, compared with Europe,America, Japan and Korea, the gap is still quite large。 Especially, the lagging behind ship supporting has restricted the development of China's shipbuilding industry。 And the total value of out-put of auxiliary ships takes about half of ship supporting, the windlass is one of them and plays an important role in the safe navigation。

The paper is the design of a Φ46 Marine Electric Windlass。 In this paper, using the knowledge of mechanical design and structural mechanics to study the mechanical structure。 Then, drawing electrical schematic based on the principle of electrical control to achieve mechanical and electrical integration。 After that, establishing a three-dimensional model to test and verify the structural strength and optimize it by motion simulation and finite element analysis。 Finally, writing the manufacturing process and instruction manuals。Study are as follows:

1。It mainly introduces the overall plan including the design of mechanical structure and electric control system。 The mechanical system includes four parts: drive device, drum shaft device, brake device and clutch device, which will be built a simulation model by SolidWorks。 The electric control system is Electrical Control Circuit in the Three-speed Cablelifter Motor。

2。Focuses on the mechanical structure design and check。 In the process  of mechanical structure design, calculation and check of key parts are done together。 At the same time, optimize the size of parts。

3。Then build a simulation model and do finite element analysis by SolidWorks, do stress analysis and deformation analysis to compare the theoretical calculations to determine the final structure。

4。Finally, prepare manufacturing plan and installation instructions。Draw the process technique for key parts and the instruction manuals and working principle notice and maintenance methods。 (责任编辑：qin)