阵列磁钢阵列传感器信号检测电路设计

摘要：传感器是工业技术和科学研究的“耳目”，是高度自动化系统乃至现代尖端技术必不可少的关键组成部分。传感器信号检测技术是信息时代的关键技术之一，它是获取准确可靠信息的重要手段。在传感器信号检测中，通常将传感器信号转换为标准电压信号，以作为数据采集系统可识别的输入信号。基于这一原理，设计了霍尔传感器阵列测量系统。系统设计过程如下：首先对平面电机Halbach二维永磁阵列排布以及磁场模型进行分析，从而得出霍尔传感器的阵列排布图，为后面的设计打下理论基础。然后开始设计传感器信号检测的硬件部分，制作两个PCB板，分别为传感器信号输出板和传感器信号放大滤波处理板。最后通过研华公司出品的PCI_1716数据采集卡将传感器的信号采集出来。54713

毕业论文关键词：永磁阵列，霍尔传感器，滤波放大，数据采集

Abstract：Sensor is industrial technology and scientific researchs’ "eyes and ears".It is essential to modern and even a key component of the development of the world competing for the high— tech.Sensor-Signals detection technology is one of the key technology of imformation era.It is a singificient mean to obtain accurate and reliable information.In the area of Sensor-Signals detection technology,it is usually to be used to transfer Sensor-Signal to Normal-Voltage signal,considered as the input singal of Data Acquisition System. Based on this principle,i have designed Hall sensor array measurement system,designing system as follows:

Firstly,we shouled analyse the planar motor’s two dimensional permanent magnet array and the magnetic field model to get Hall-Sensor array distribution chart,laying the foundation for further design.Secondly,we begin to design the hardware part of Sensor-Signal detection,making two PCB,output of Sensor-Signal mode and Amplifying and filtering processing mode.Last but not least,we should acquire the signal data from Amplifying and filtering processing mode by PCI_1716.

Keywords:Permanent magnet array,Hall sensor, Amplifying and filtering processing,Data acquisition

1 绪论 4

1.1选题背景及意义 4

1.2本课题研究现状 4

2 理论基础 4

2.1传感器的基本特性及评价指标 4

2.2霍尔传感器 5

2.3设计需求与原则 6

2.3.1设计需求 6

2.3.2设计原则 8

3 系统总体设计方案 9

3.1系统整体框图 9

3.2硬件模块选取 10

3.3硬件模块简介 11

3.3.1 霍尔传感器简介 11

3.3.2电源模块简介 13

3.3.3仪表放大器简介 14

3.3.4 OP284简介 16

3.3.5 PCI1716简介 16

4 系统硬件设计 17

4.1传感器模块 17

4.2 电源模块 18

4.3 放大滤波模块 18

4.4 PCB板设计 21

4.4.1 PCB布局 22

4.4.2 PCB布线阵列磁钢阵列传感器信号检测电路设计:http://www.youerw.com/tongxin/lunwen_58938.html