菜单
  

    摘要:LED是最新一代的绿色清洁光源,它有很多优点,但在大功率LED上,LED封装还有明显的不足。本论文利用纳米碳材料改性有机硅橡胶来满足大功率LED上的使用。首先利用KH550改性纳米碳材料,以增强纳米碳材料与有机硅橡胶的相容性,然后使用傅里叶红外分析表征其结构,然后使用物理共混法制备纳米碳材料/有机硅橡胶的复合材料,测试复合材料的透光率、电阻率、介电性能、力学性能,并进行分析,并分析不同纳米碳材料(改性的氧化石墨烯、改性的羟基碳纳米管、羟基碳纳米管)、纳米碳材料不同含量(0.01%,0.02%,0.04%,0.06%,0.1%,0.2%)对有机硅橡胶性能的影响。结果表明KH550可以良好的改性纳米碳材料,提高其复合材料的力学性能、光学性能、介电常数、电阻率。纳米碳材料含量越高,其复合材料的力学性能、介电常数、电阻率提高,但透光率降低。改性的羟基化碳纳米管在力学性能、介电常数方面更高,而在电阻率、光学性能改性的氧化石墨烯更高。47066

    毕业论文关键词:纳米碳材料;LED;有机硅橡胶;改性;KH550

    Properties of nano-carbon material modified RTV silicone rubber

    Abstract:LED is the latest generation of clean and green light, it has many advantages, but in the high-power LED, there are obvious shortcomings LED package. In this paper, the use of carbon nano-materials modified silicone rubbers to meet the power LED on. Firstly KH550 modified nano-carbon materials, nano-carbon material in order to enhance the compatibility of the silicone rubber, and then use the Fourier transform infrared analysis to characterize the structure and use of composite physical blends prepared nano-carbon material / silicone rubber materials, light transmission rate testing of composite materials, electrical resistivity, dielectric properties, mechanical properties, and analysis, and analysis of different nano-carbon material (modified graphene oxide, hydroxyl-modified carbon nanotubes, carbon nanotubes hydroxy ), the content of different nano-carbon material (0.01%, 0.02%, 0.04%, 0.06%, 0.1%, 0.2%) on the organic properties of silicone rubber. The results show that good can KH550 modified nano-carbon material to improve the mechanical properties of composite materials, optical properties, dielectric constant, resistivity. Nano-carbon material content is higher, the mechanical properties of the composite material, the dielectric constant, resistivity increased, but the transmittance is reduced. Hydroxy-modified carbon nanotubes in mechanical properties, higher the dielectric constant, and the resistivity, optical properties of graphene oxide modified later.

    Key words: Nano-carbon material, LED, Silicone rubbers, Modification, KH550

     

    目录

    1 绪论 1

    1.1 LED的简介 1

    1.2 LED的封装材料 2

    1.2.1 环氧树脂封装材料 2

    1.2.2 有机硅封装材料 3

    1.3 纳米碳材料 4

    1.3.1 石墨烯的简介 5

    1.3.2 碳纳米管的简介 5

    1.4 纳米碳材料改性有机硅橡胶 7

    1.4.1 原位聚合法 7

    1.4.2

  1. 上一篇:铝合金不同热处理工艺下体积变化的测量及其残余应力分析
  2. 下一篇:微波溶剂热法制备铁取代磷酸钴锂与改性研究
  1. 金属纳米晶体铁磁转变温度的热力学研究

  2. 材料加工状态对铝合金搅...

  3. 铅离子印迹多孔材料制备及性能研究

  4. 石墨烯碳基复合材料制备及其传热特性研究

  5. 永钢三炼钢转炉高碳低磷的控制技术

  6. 纳米TaWN复合薄膜室温蠕变性能研究

  7. 酞菁铜/石墨烯复合材料的制备及其性能研究

  8. 现代简约美式风格在室内家装中的运用

  9. 高警觉工作人群的元情绪...

  10. 巴金《激流三部曲》高觉新的悲剧命运

  11. 浅析中国古代宗法制度

  12. C++最短路径算法研究和程序设计

  13. g-C3N4光催化剂的制备和光催化性能研究

  14. 上市公司股权结构对经营绩效的影响研究

  15. NFC协议物理层的软件实现+文献综述

  16. 中国传统元素在游戏角色...

  17. 江苏省某高中学生体质现状的调查研究

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回