In this thesis, poly(St-co-AMTPS) AIE NPs (named as SNPs) with various contents of AMTPS were synthesized through copolymerization of St and AMTPS in the water-borne miniemulsion systems。 The influence of the AMTPS content on the particle morphology and particle size, polymerization kinetics, luminescent properties of AIE NPs and copolymers were systematically studied。 According to the microscopic observation result, SNPs displayed a regular spherical morphology and had a narrow size distribution。 The kinetic results showed that all the polymerization rates of the systems with various AMTPS loadings were fast, and the St conversion could exceed 80% within 60min。 With the increase of the AMTPS content, the molecular weight of poly(St-co-AMTPS) decreased due to the chain transfer reaction of the propagated radicals to AMTPS。 SNPs could emit blue-green fluorescence under the irradiation of UV light, and the PL intensity of the AIE NPs could be precisely controlled by the loading of AMTPS。 It should be pointed out that the ФF of SNPs was relatively low, for example ФF of the SNPs with 20wt% of AMTPS was only 22。6%。 With the increase of the volume fraction of water in the tetrahydrofuran (THF)/water mixed solvent, the PL intensity of poly(St-co-AMTPS) gradually increased prior to 70%。 Further increase of the water fraction, the PL intensity of the copolymer was significantly enhanced, displaying a typical AIE behavior。 As the polymerization proceeded, more and more polymers were produced in the dispersed phase, leading to the increase of the viscosity of the dispersed phase。 In addition, with the accumulation of copolymers in the dispersed phase, the dispersed phase gradually transferred from a liquid state to a solid one。 Correspondingly, the PL intensity of the emulsion increased。

In conclusion, AIE polymer NPs can be conveniently prepared through copolymerization of a common monomer and an AIE functional monomer in green water-borne miniemulsions。 The proposed technique in this thesis holds high versatility and flexibility to prepare AIE NPs with a high PL intensity, high fluorescence quantum yield, and good biocompatibility。

毕业论文关键词:细乳液;自由基共聚;聚集诱导发光;聚合物纳米粒子;形态结构

Keyword: miniemulsion; radical co-polymerization; aggregation-induced emission; polymeric nanoparticles; morphology

目   录 4

一。引言 5

二。实验部分 5

2。1。 实验原料及仪器 5

2。2。AMTPS 的合成 7

2。3。 St-AMTPS 共聚物纳米粒子的制备 8

2。4。聚合物的纯化 9

2。5。St-AMTPS共聚物聚合物的AIE性能评估 9

2。6。表征 9

2。6。1。透射电镜(TEM) 9

2。6。2。动态光散射(DLS) 9

2。6。3。紫外—可见光谱分析 10

2。6。4。荧光光谱分析 10

2。6。5。荧光量子产率(ΦF) 10

2。6。6。St 转化率测试 10

2。6。7。凝胶渗透色谱( GPC) 10

2。6。8。核磁共振 11

2。6。9。 X 射线光电子能谱( XPS) 11

三。结果与讨论 11

3。1。AMTPS 的合成 11

上一篇:铜基正极材料的合成与电化学性能研究
下一篇:纯铁纳米线相变分子动力学模拟研究

新型强荧光发射的超分子凝胶的合成研究

聚合物凝胶电解质的制备及性能研究

新型荧光传感器的合成及制备

超分子聚合物凝胶的性能测试

新型AIE性能的超支化超分子聚合物的表征

基于生物模板的聚合物超疏水表面的研究

低碳钢薄壁构件PAW电弧成型特性及尺寸控制

ASP.net+sqlserver企业设备管理系统设计与开发

我国风险投资的发展现状问题及对策分析

互联网教育”变革路径研究进展【7972字】

麦秸秆还田和沼液灌溉对...

LiMn1-xFexPO4正极材料合成及充放电性能研究

张洁小说《无字》中的女性意识

新課改下小學语文洧效阅...

网络语言“XX体”研究

老年2型糖尿病患者运动疗...

安康汉江网讯