菜单
  
    摘要:目前,我国正在大规模的建造连续刚构桥,桥梁的建造不仅可以极大地方便人民百姓出行,更能加快一个地区的经济发展,可以说桥梁确实是当今社会发展的一项重要土木工程。本次设计的设计内容是一座四跨连续刚构桥,桥梁跨度设置度为50m+80m+80m+50m。在整个设计过程中,使用Midas来进行主要建模计算工作,预应力钢筋布置也是在Midas中来设计完成的的,通过Midas计算结果,可以进一步判断桥梁的受力情况是否合格。施工方法选用悬臂对称施工,最后还对设计结果进行了正常使用阶段的极限验算,以确保设计桥梁的安全可投入使用。21083
    毕业论文关键词:连续刚构桥;Midas软件;悬臂法对称施工;应力验算
    Design of Four-span continuous rigid frame bridge with 50m+80m+80m+50m
    Abstract:At present, the continuous rigid frame bridge is being built on a large scale, the construction of the bridge can not only greatly convenient for the people and the people travel, can speed up the economic development of a region, to say the bridge is an important civil engineering in today's social development. The design content of this design is a Four-span-long span continuous rigid frame Bridges span set degrees to 50m+80m+80m+50m. In the entire design process, we use Midas for main modeling calculation work, prestressed reinforcement arrangement is to design a complete in Midas, by Midas calculation results, we can further judge whether the force of the bridge. Construction method selects the symmetrical cantilever construction, and finally has carried on the normal use of the result of the design phase of the limit analysis, in order to ensure the safety of the bridge design can be put into use.
    KeyWords: Continuous rigid frame bridge; Midas; Cantilever construction method of symmetry; Stress calculation
    目录
    1 绪论    1
    1.1 毕业设计的目的和意义    1
    1.2 连续刚构桥在国内外研究的回顾和发展趋势    1
    1.2.1 在国内外的研究回顾    1
    1.2.2 发展趋势    2
    1.3 连续刚构桥的基本构造特点    2
    1.3.1 桥梁跨径    3
    1.3.2 箱梁根部底板厚度    3
    1.3.3 箱梁顶板厚度    3
    1.3.4 主梁高度    3
    1.4 连续梁桥悬臂法施工方法介绍    3
    1.4.1 施工特点    3
    1.4.2 托架与挂篮    4
    1.4.3 工艺流程    4
    1.5 Midas软件    4
    1.6 本文研究内容    4
    2 桥跨总体布置及结构主要尺寸    5
    2.1 桥型布置及孔径划分    5
    2.2 截面形式及截面尺寸拟定    5
    2.2.1 截面形式    5
    2.2.2 立面形式    5
    2.2.3 主梁高度    5
    2.2.4 箱梁底板厚度设置    5
    2.2.5 腹板厚度设置    5
    2.3 主梁分段与施工阶段的划分    6
    2.4 小结    6
    3 荷载内力计算    7
    3.1 基本参数    7
    3.1.1 计算方法    7
    3.1.2 材料信息    7
    3.1.3 荷载信息    8
    3.2 恒载计算    9
    3.2.1 结构自重    9
    3.2.2 二期恒载    11
    3.3 活载内力计算    13
    3.4 整体升温    16
    3.5 整体降温    18
    3.6 顶板日照引起的温度梯度荷载    21
    3.7 荷载组合    23
    3.8 小结    23
    4 预应力钢束估算与配置    24
  1. 上一篇:纪检监察培训中心建筑结构设计+CAD图纸
  2. 下一篇:预制装配式框架结构抗震设计研究
  1. 小跨度预应力混凝土连续...

  2. 鄂州临港大桥预应力混凝土连续梁桥设计

  3. 江苏盐城通榆河大桥预应...

  4. 预应力混凝土连续预制T梁...

  5. 三跨预应力混凝土连续梁桥设计

  6. 预应力混凝土连续梁桥子材桥设计

  7. 奉化江一联三跨连续梁桥设计+图纸

  8. 中国传统元素在游戏角色...

  9. C++最短路径算法研究和程序设计

  10. 上市公司股权结构对经营绩效的影响研究

  11. g-C3N4光催化剂的制备和光催化性能研究

  12. 高警觉工作人群的元情绪...

  13. 现代简约美式风格在室内家装中的运用

  14. 浅析中国古代宗法制度

  15. NFC协议物理层的软件实现+文献综述

  16. 江苏省某高中学生体质现状的调查研究

  17. 巴金《激流三部曲》高觉新的悲剧命运

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回