摘要抗红外烟幕干扰材料研究为了更好的研究红外烟幕材料，本文首先对一些冷烟幕材料的红外光谱表征，得到一些常见材料的红外透过率光谱，定量地描述其红外光谱衰减特性，以便于选择更好的干扰材料；然后进行了一种新型红外陶瓷材料的制备，利用红外光谱仪、SEM、差热分析仪等仪器对它的表观形貌、粒径、热分解性和红外透过率光谱等进行了表征；最后，为了增强铜粉作为红外烟幕材料的性能，采用溶胶--凝胶法制备了SIO2/铜粉复合粒子，研究了搅拌等工艺条件对材料包覆的影响，并且利用红外光谱仪、SEM、差热分析仪等仪器对它的表观形貌、粒径、热分解性和红外透过率光谱等进行了表征。64345

毕业论文关键词  红外陶瓷  烟幕  包覆   

毕业设计说明书（论文）外文摘要

Title  Propellant surface deterring processing technology

Abstract To deter the propellant surface treatment is to improve the combustion performance, access to important technical progressive combustion method. Currently, the traditional deterred technique applies only to single-base propellant plasticizer-free and plasticizer content is low (<15%) of the double-base propellant, for high energy propellant plasticizer content, difficult to solve deterred agents penetrate to the propellant surface to form a concentration gradient and the long-term storage during the conflict between the anti-migration.

  This paper is to discuss the new design and desensitized TPTM with azide reaction of nitramine propellant activity deterred process by liquid phase granular seven holes on the drug for DA deterred, in propellant surface to form a concentration gradient, discussion of different process conditions Effect on the deterred. Closed bomb test results show that desensitized with traditional polyester propellant energy after the PPA reduction deterred more desensitized TPTM new deterred propellant after the energy is essentially the same. Heat accelerated aging test results show that, TPTM anti-migration performance is poor, not suitable for DA desensitized propellant; to TPTM desensitized propellant for the before and after the combustion is essentially the same aging, anti-migration performance is good. Comprehensive comparison of TPTM desensitized propellant for the deterred effect of temperature is 60 ℃, deterred, deterred agent in volume of 3% 1h propellant deterred better overall performance.

Keywords  gun propellant  high plasticizer  concentration  surface deterring   anti-mobility  progressive combustion

毕业设计说明书（论文）外文摘要

Title  Anti infrared interference materials research

Abstract In order to study the infrared smoke screen material, this paper first infrared spectral characterization of a variety of common materials, get some common materials in order to understand the infrared spectra, infrared absorption properties of these materials; then the cordierite was prepared, and the study of infrared spectrum, its SEM, particle size and TG, effects of temperature and the change and process change on cordierite prepared, cordierite infrared ceramic material with infrared absorption properties of the prepared; at the same time, in order to enhance the bronze powder as the performance of infrared smoke screen material, SiO2/bronze powder composite particles were prepared by sol-gel method, study process conditions of agitation on the influence of cladding material, and the change of bronze powder composite particles were various properties.

Keywords  Infrared  ceramic  smoke screen  cladding

1  绪论 1

1.1  烟幕干扰材料概述 1

1.2  抗红外烟幕材料的研究现状