菜单
  
    摘要本毕业论文以高增塑剂含量叠氮硝胺发射药(后面简称DA药)为研究对象,利用叠氮硝胺易与多炔基化合物发生反应的原理,研究了相适应的表面钝感剂、钝感工艺试验及其钝感药的基本性能。主要研究结果如下:
    (1)研究钝感剂NPM与叠氮硝胺的反应活性,固化结果表明NPM与叠氮硝胺质量比为1:1时,固化效果最好。对原料和产物进行红外和DSC检测,证明NPM和叠氮硝胺易发生反应,且反应产物聚三唑与DA药的相容性和安定性较好。
    (2)采用湿法钝感技术钝感DA药,对比不同钝感剂和钝感条件对钝感效果的影响。采用密闭爆发器试验对钝感DA药的燃烧性能进行表征,分析得到:以NPM作为钝感剂的钝感DA药具有较好的燃烧渐增性。
    (3)通过加速老化试验研究钝感剂在DA药中的迁移性能,结果表明以NPM为钝感剂的钝感发射药老化后,发射药初始燃烧动态活度略有升高,燃烧渐增性能减弱;而以另一多炔基化合物NPA为钝感剂的钝感发射药,燃烧渐增性能良好,且老化后期燃烧性能基本不变,说明钝感剂在钝感药中的抗迁移性能很好。9710
    关键词  DA发射药  表面钝感  渐增性燃烧  抗迁移性毕业设计说明书(论文)外文摘要
    Title  Study on Surface Modification Technique of Gun   Propellant                    
    Abstract
    To solve the surface deterring technology problem of azide nitramine gun propellant (DA propellant) with high plasticizer concentration, a multi-alkynyl compound was used to be a deterrent which can react with DIANP . A series of experiments was done .Following are the conclusions of the study.
    (1) It was found that when their mass ratio was 1:1, it would have a good curing effect.  The reactivity between NPM and DIANP was characterized with FTIR and DSC. It certified that NPM can react with DIANP and the product have  good compatibility and stability with DA propellant.
    (2) DA grain propellant was deterred by the way of Wet insensitive. Insensitive effect were discussed by different deterrents and process conditions deterring. The closed bomb experiment’s conclusions are these: NPM show better deterring effect for DA propellant.
    (3) Heat accelerated aging test results show that, the initial dynamic activity of propellant detered by NPM was reduced and the burning progression weakened after the accelerating aging. But the other propellant detered by NPA have good burning progression and show good anti-mobility for DA propellant.
    Keywords  DA propellant  surface deterring  progressive combustion   anti-mobility
    目    次
    1  绪论    1
    1.1  研究的目的和意义    1
    1.2  国外研究概况    1
    1.2.1  钝感剂的选择    1
    1.2.2  钝感机理研究    3
    1.2.3  钝感工艺    4
    1.2.4  钝感效果表征    5
    1.2.5  钝感剂的检测    5
    1.3  本论文主要研究内容    6
    2  钝感剂选择及反应活性研究    6
    2.1  钝感剂的选择    6
    2.2  钝感剂反应活性    7
    2.2.1  固化结果图片    8
    2.2.2  红外检测    8
    2.2.3  差示扫描量热(DSC)法    10
    2.3  相容性及安定性研究    12
    3  钝感实验    13
    3.1  钝感实验方案    13
    3.2  实验步骤    13
    3.3  钝感DA药的燃烧性能    14
  1. 上一篇:高效重金属螯合捕集剂的制备研究
  2. 下一篇:基于外切酶反应和氧化石墨烯荧光检测碱性磷酸酶的活性
  1. 非离子表面活性剂浊点萃...

  2. UASB+SBR某中药厂污水处理工程设计+CAD图纸

  3. A/O法CODcr制药废水生物处理工艺研究

  4. 以奥司他韦为模板的新型...

  5. 电沉积技术在钛基表面制...

  6. 钾基钙钛矿陶瓷制备及其变温发射率性质研究

  7. 年产30t金雀异黄酮医药科...

  8. 巴金《激流三部曲》高觉新的悲剧命运

  9. C++最短路径算法研究和程序设计

  10. 上市公司股权结构对经营绩效的影响研究

  11. 高警觉工作人群的元情绪...

  12. 中国传统元素在游戏角色...

  13. g-C3N4光催化剂的制备和光催化性能研究

  14. 现代简约美式风格在室内家装中的运用

  15. 浅析中国古代宗法制度

  16. 江苏省某高中学生体质现状的调查研究

  17. NFC协议物理层的软件实现+文献综述

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回