摘要:随着科技的不断进步,现代通信技术对设备的要求愈来愈高,高性能、小型化、高度集成和低成本已然成为未来微波射频领域发展的前进方向。对于微波滤波器这一重要的射频元器件的要求也同样如此。而基于L T C C技术的多层微波滤波器正好满足了这些需求,逐渐成为了微波元器件研究的热点之一。68590

本文首先介绍了L T C C技术的发展历程以及具有的优缺点,简单地梳理了L T C C的工艺流程。然后介绍了滤波器相关知识,包括滤波器的发展状况与性能要求,滤波器的类型及技术指标,介绍了低通原型滤波器并考虑了如何在低通原型滤波器的基础上实现频率变换。最后进一步分析L T C C滤波器的设计,简单介绍了L T C C滤波器一般的实现方法,以带状线型滤波器为例,详细介绍了此类滤波器的基本理论以及设计方法,并通过微波射频仿真软件HFSS设计了一个中心频率为1.3GHz的四级带状线带通滤波器和一个中心频率为3.8GHz的六级带通滤波器。经过优化仿真,得到了满足性能要求的两个L T C C滤波器。其中,四级带状线带通滤波器的中心频率为1.3GHz,体积为3.23mm×4.53mm×1.53mm,插入损耗最小值为1.3dB,驻波比小于1.4。六级带状线带通滤波器滤波器的中心频率为3.8GHz,体积为4.83mm×4.23mm×1.53mm,插入损耗最小值为1.6dB,驻波比小于1.1。

毕业论文关键词   低温共烧陶瓷    微波滤波器    三维    小型化

毕业设计说明书(论文)外文摘要

Title     The Research of Miniaturized Microwave Filters          

Abstract

With the continuous progress of technology, modern communication technology has increasingly demand for high-level equipment, high performance, miniaturization, high integration and low cost have become the forward direction of equipment in microwave radio frequency field. The situation of the microwave filter as one of the essential components in microwave module is the same case. Multilayer microwave filter which is based on the LTCC technology meets the these requirement and is becoming one of the hot research fields.

This paper firstly introduces the development course, the specific advantages and disadvantages of the LTCC technology and the process flow of TLCC simply. Next ,starting with the stripline filters, we analyze filter development, requirement ,filter types and technical indexes step by step .Also, the prototype of low pass filter and how to achieve frequency transformation was introduce.

The last step is to introduce the design of LTCC filter and the general realization methods. The basic theory and design approaches of LTCC filters by using banded stripline was shown. Two band pass filters with center frequencies of 1.3GHz and 3.8GHz were optimized and simulated by the EM simulation software HFSS to get the LTCC filters which satisfy specification requirements.

The center frequency of the four order filter is 1.3GHz.The overall size of it is 3.23mm×4.53mm×1.53mm.The minimum value of insertion loss is 1.3dB and the VSWR is less than 1.4.The center frequency of the six order filter is 3.8GHz.The overall size of it is 4.83mm×4.23mm×1.53mm.The minimum value of Insertion loss is 1.6dB and the VSWR is less than 1.1.

Keywords    L T C C    Microwave Filter    3D    Miniaturization

目   次

1 引言 1

2  L T C C技术 2

2.1 L T C C技术的发展 2

2.2 L T C C的技术优缺点 3

2.3 L T C C工艺流程

上一篇:STC89C52单片机无线遥控电子计分显示牌系统设计+电路图+程序
下一篇:HFSS小型化圆极化天线研究

微波通信的应用研究

了+ADS微波平面功率合成器设计

ADS微波平行耦合微带线滤波器设计

ADS微波低噪声放大器的设计

微波频率合成器的设计

微波Lange耦合器的设计与仿真

ADS微波阶跃阻抗滤波器的设计

新課改下小學语文洧效阅...

老年2型糖尿病患者运动疗...

互联网教育”变革路径研究进展【7972字】

LiMn1-xFexPO4正极材料合成及充放电性能研究

安康汉江网讯

我国风险投资的发展现状问题及对策分析

麦秸秆还田和沼液灌溉对...

张洁小说《无字》中的女性意识

网络语言“XX体”研究

ASP.net+sqlserver企业设备管理系统设计与开发