摘要随着传感器和单片机控制技术的不断发展,非接触式检测技术已被广泛应用于多个领域。与其它测距方式相比,超声波测距具有可以直接测量近距离目标、纵向分辨率高、适用范围广、方向性强的优点。目前,超声波测距已普遍应用在液位测量、移动机器人定位和避障等领域。另外,对于智能小车的设计与制作也是如火如荼。随着超声波和智能传感器合技术的进步,智能车特殊工况下实时准确跟随成为可能。46270
本次设计是以AT89C52单片机为主控制器,然后再结合超声波测距的原理,实现智能小车的实时跟随控制。这套系统采用硬件电路设计和软件设计相结合的方式,硬件系统主要是由超声波数据采集模块、小车驱动模块、主控器以及报警模块所组成,具有模块化和多用化等特点,智能小车则是以AT89C52单片机为核心,通过无线通信来接收超声波测距系统发送来的控制信号。本次设计中的超声波测距模块能够应用于机器人的距离信息采集、汽车防撞测距等众多方面,具有很大的应用价值。
毕业论文关键词:超声波;测距;AT89C52;无线通信
ABSTRACT With the continuous development of the control technology of the sensor and the single chip microcomputer, the non-contact detection technology has been widely used in many fields. Compared with other ranging methods, ultrasonic distance measurement has the advantages of direct measurement of the target, high longitudinal resolution, wide application range and strong directivity. At present, ultrasonic distance measurement has been widely used in liquid level measurement, mobile robot localization and obstacle avoidance and other fields. In addition, the design and production of smart car is in full swing. With the development of the technology of ultrasonic and intelligent sensors, it is possible to follow the intelligent vehicle in real time under special conditions.
This design is based on the AT89C52 microcontroller as the main controller, and then combined with the principle of ultrasonic distance measurement, intelligent car to achieve real-time tracking control. The system uses the combination of hardware circuit design and software design, hardware system is mainly by the ultrasonic data acquisition module, car driving module, main controller and alarm module, wherein, has a modular and multi use characteristics, smart car is AT89C52 microcontroller as the core, through the wireless communication to receive the ultrasonic ranging system to send control signals. The design of ultrasonic distance measurement module can be applied to the robot's distance information collection, automotive collision avoidance and other aspects of many aspects, has great application value.
Key words:ultrasonic;Ranging;AT89C52;wireless communication
目 录
第一章 绪论 1
1.1课题研究背景 1
1.2课题研究意义 1
第二章 超声波测距电路介绍 3
2.1超声波传感器介绍 3
2.1.1超声波发射模块原理简介 3
2.1.2超声波接收模块原理简介 4
2.2超声波发生器介绍 6
2.3超声波测距的基本原理 6
第三章 智能小车的运动控制介绍 8
3.1定位设计 8
3.1.1定位套件原理简介 8
3.2跟随功能 9
3.3误差分析 9
3.3.1误差来源 9
第四章 硬件电路设计 10
4.1控制器 10
4.2超声波测距模块 12
4.3温度补偿模块 13
4.4超声波测距报警模块 14
- 上一篇:PLC全自动卷边机控制系统的设计+梯形图
- 下一篇:MATLAB电力系统谐波源及其对系统影响研究
-
-
-
-
-
-
-
C++最短路径算法研究和程序设计
现代简约美式风格在室内家装中的运用
高警觉工作人群的元情绪...
g-C3N4光催化剂的制备和光催化性能研究
中国传统元素在游戏角色...
NFC协议物理层的软件实现+文献综述
巴金《激流三部曲》高觉新的悲剧命运
江苏省某高中学生体质现状的调查研究
浅析中国古代宗法制度
上市公司股权结构对经营绩效的影响研究