菜单
  
    摘要汽车工业的可持续发展面临着能源和环境保护的双重的压力,零排放、零污染的电动汽车因此成为了世界各国大力发展的方向。然而,电动汽车一次充电的续航里程远远小于传统的燃油汽车,这一严重不足影响了电动汽车的迅速推广和产业化。而再生制动是解决电动汽车续航里程不足的有效方案之一。而在再生制动的运用当中,如何能够高效的回收和利用再生的能量是非常主要的问题,本文就主要分析了不同制动方式下能量回收系统的不同状态。文中简述了电动汽车再生制动系统的基本结构和工作原理,为分析回收率的不同奠定了基础。
    首先介绍了电动汽车再生制动系统研究的背景和意义、国内外发展现状等并讨论了电动汽车队驱动系统的一些基本要求,利用简化模型达到的仿真目的,能够对再生制动的回收系统做基本的模拟运行。10415
    然后通过matlab中的simulink搭建直流电机模型仿真了电动汽车不同制动方式下再生制动的状态,并对回收系统的结构进行了分析,得到了关于回收率的数据并予以处理。通过图表的形式使得不同制动方式下再生制动能量回收率的状态得以体现。
    最后本文通过对直流电机各项参数的重新设置对提升再生制动能量回收率的方法进行了总结以及分析。为提升回收率提供了有效途径。
    关键词:电动汽车;再生制动;simulink建模;回收系统;制动方式
    毕业设计说明书(论文)外文摘要
    Title Research on regenerative braking system of
    electric vehicles
    Abstract
    Sustainable development of the automotive industry is facing the dual pressure of the energy and environmental protection, zero emissions; zero-pollution electric cars thus become vigorously develop the direction of the world. However, the mileage on a single charge of electric vehicles is far less than traditional fuel vehicles, this serious lack of impact of rapid promotion and industrialization of electric vehicles. Regenerative braking is an effective solution to solve the electric vehicle mileage one. The use of regenerative braking, how can the efficient recovery and use of renewable energy is a very major problem, this paper mainly analyzes the different states of a different brake energy recovery system. This paper outlines the basic structure and working principle of the electric vehicle regenerative braking system, which also laid the foundation for the analysis of recovery of different.
    The papers outlines the background and significance of the electric vehicle regenerative braking system, development in the world and discuss some basic requirements of the drive system of electric vehicle fleet, that the use of the DC motor can achieve the desired simulation state, capable of regenerative braking recovery system to do the basic simulation run.
    In this paper, the Matlab simulink build a state of regenerative braking in the braking mode of the DC motor model simulation of electric vehicles, and recovery system, structure analysis, on the recovery of data and handle. Through the chart in the form of the state of regenerative braking energy recovery to be reflected in different braking mode.
    Finally, through the re-set the parameters of the DC motor to a summary and analysis to enhance the regenerative braking energy recovery. Provides an effective way to improve recovery.
    Key words: electric vehicle (EV); regenerative brake; Simulink modeling;
    recovery system;brake mode
    目次
    1 绪论 1
    2  电动汽车再生制动的基础知识 10
    2.1 再生制动系统的结构10
    2.2电动汽车再生制动原理11
    2.3 再生制动的影响因素 12
    2.4 电动汽车制动模式 14
    2.5 本章小结•14
    3  电动汽车再生制动系统的simulink仿真16
    3.1 simulink简介 16
    3.2 再生制动模型的建立17
  1. 上一篇:基于DSP的燃料电池测控系统硬件设计
  2. 下一篇:基于非线性规划的数据校正联合算法的研究
  1. STC89C52纯电动汽车电池状态...

  2. SIMULINK12000HP油服船排气系...

  3. DTU基于数字控制的电动汽车充电桩设计

  4. DSP电动汽车驱动系统控制设计+电路图+程序

  5. V2G电动汽车充放电对配电...

  6. 51单片机电动汽车充电桩控制系统设计

  7. Simulink单相电路的谐波与无...

  8. 巴金《激流三部曲》高觉新的悲剧命运

  9. 现代简约美式风格在室内家装中的运用

  10. C++最短路径算法研究和程序设计

  11. 中国传统元素在游戏角色...

  12. 高警觉工作人群的元情绪...

  13. 浅析中国古代宗法制度

  14. 江苏省某高中学生体质现状的调查研究

  15. g-C3N4光催化剂的制备和光催化性能研究

  16. NFC协议物理层的软件实现+文献综述

  17. 上市公司股权结构对经营绩效的影响研究

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回