摘要本文针对制导弹药内弹道低过载的特点，基于经典内弹道理论，建立了适用于制导弹药内弹道过程的理论模型和数学模型，采用将数学模型无量纲化的方法，运用四阶龙格-库塔法进行时间推进，通过编程计算求解制导弹药的内弹道。根据制导弹药的内弹药程序，得到制导弹道的内弹道计算结果，并且分析了火药形状、燃速指数和燃速系数对内弹道结果的影响，同时根据分析结果对制导弹药的内弹道过程进行装药优化。在装药优化过程中，对制导弹药进行混合装药装药优化，并将优化结果和未优化的结果进行比较分析。82757

毕业论文关键词  制导弹药  内弹道  装药优化  混合装药

毕业设计说明书外文摘要

Title    Simulation and analysis of interior ballistic process of guided ammunition                                               

Abstract According to the characteristic of low load in the interior ballistic of guided ammunition ,including  high chamber pressure and low velocity,based on the classical interior ballistic theory, A theoretical model and a mathematical model for the interior ballistic process of guided ammunition are established。By adopting the method of non dimensional mathematical model and the four order Runge Kutta method in time,Writing program to calculate the process of  the interior ballistic of guided ammunition。According to the program, the internal ballistic calculation results of the guidance trajectory are obtained。What is more,he influence of the shape of the powder, the burning rate exponent and the burning rate coefficient on the interior ballistic trajectory is analyzed。In the same time,based on the analysis results, the optimization of the interior ballistic process of the guided ammunition was carried out。In the procedure of loading optimization,carrying on the optimization of mixed charge in the interior ballistic of guided ammunition。Finally,The optimization results and the results were compared and analyzed。

Keywords    guided ammunition  interior ballistic   loading optimization mixed charge 

目   次

1  绪论 1

1。1 研究背景与意义 1

1。2 国内外发展现状 1

1。3 本文的主要工作 2

2  制导弹药内弹道过程及建模 4

2。1制导弹药内弹道过程 4

2。2制导弹药内弹道的模型建立 4

2。3计算方法 11

2。4编程计算 12

2。5本章小结 13

3  制导弹药内弹道数值模拟及结果分析 14

3。1制导弹药内弹道计算 14

3。2计算结果 15

3。3制导弹药内弹道结果分析 17

3。4本章小结 21

4  制导弹药内弹道装药优化设计 23

4。1装药优化设计方案 23

4。2装药优化计算 25

4。3装药优化设计结果 26

4。4本章小结