在车间非工艺设计中，罗列出了安全、环保等非工艺因素加以考虑，并且明确了人员安排等相关事宜。
通过经济核算，对此次设计的成本进行了估算。
设计最后车间布置的内容，简单介绍了车间布置的要求与原则。并且对此次设计的具体车间编排作了简要说明。
Gross instruction of design
The topic of this graduation design is the annual output of 100000 tons of long glass fiber reinforced PP plate workshop process design.
Plastics as raw material are used to produce plastic sheet which are widely used in construction, chemical industry. When used in chemical industry, environmental protection, building plate, they show some features: wear-resistant, resistant to vibration, corrosion resistance, recyclable, strength, anti-aging, waterproof, moisture proof, not easy to deformation, repeated use, etc. And now, the hard plastic plate can also be recycled for processing, greatly reducing the cost.
The requirement of this design is to design sheet with specifications for 15mm thick, 1500mm long, 3000mm wide and annual output of 100000 tons of long glass fiber reinforced PP plate. Plank should to comply with the technical requirements and parameters, and at the same time, we must give full consideration to the working environment of half sheet structures or structural components manufactured in the field of automobile, in order to design the appropriate formula to improve the processing performance, improve product performance. Reduce the products finished, in order to meet the requirements.
Long glass fiber reinforced PP plate workshop process design is fairly complicated. In the design, we should consider the following: determining the plate production requirements and specifications according to production needs or subject requirements;, improving the processing performance and various properties of the product in order to meet the requirements according to the requirement of formula design; comparing the main technological route at home and abroad, choosing suitable production process; determining the appropriate measure of product quality; the long glass fiber reinforced PP plate workshop production process calculation including the production capacity calculation, material balance, equipment selection, the numbers calculation and raw material consumption calculation, etc.
Long glass fiber reinforced PP plate products is a multicomponent plastic. design of the product formula is a complex technical work, in which the application performance of main raw materials and auxiliary materials, the specifications and quality of products, the devices, mold and all kinds of product which relates to the main raw materials and specifications and quality, production equipment, mold and all kinds of auxiliary production equipment and the control of processing parameters are involved. Therefore, we should have a more comprehensive, systematic understanding of raw materials, equipment and production technology and others, not only having the theory more comprehensive knowledge, but also having practical work experience which refers to considering about the aspects of raw material, equipment and technology and other factors to make a reasonable design of material composition.
Long glass fiber reinforced PP according to the use of the products and the characteristics of different, its should have different ways of molding. It can be divided into: rolling molding, extrusion molding, injection molding, blow molding and so on. But, for the long glass fiber reinforced PP plate, the main forming method mainly is extrusion molding .
PP/LGF products in the design process using two sets of twin-screw extruder production, upstream of the traditional mixing equipment to blends of PP and additives, and then mix the material transfer to the first set of twin screw, double screw in the first group of the material being fully mixing, molding after the molten material into the second group of double screw, at the same time in the second set of double screw feeding mouth, preheat the tension of the glass fiber is feeding, the second group of double screw shear force middle-class, screw length is shorter, make its have the appropriate mixing effect and shear effects, and in the second set of double screw can be more flexible to change Chinese elements, according to need to pass the collocation of different components adjustment to get suitable PP/LGF products. 年产10万吨长玻璃纤维增强PP板材车间工艺设计(2):http://www.youerw.com/huaxue/lunwen_1401.html