驾驶室内饰结构件注射模CAD设计

摘要本文是对汽车驾驶室内饰结构件的注塑成型模具进行设计与研究。将该结构件的生产工艺与具体结构加以分析，通过一定的设计方法、原则，对其结构件的注塑模具各个机构、系统合理的分配和选取，保证其浇注、顶出系统与抽芯、成型部分的合理性与实用性。同时，选择了合适的注塑机型，并将以上设计的有关参数进行详细的校核与修正取舍。考虑到所注塑成型产品的工艺条件，本设计采用一模一腔的生产方式，并用顶杆将其顶出，采用了弹簧的抽芯结构，使得总体满足一定的合理性要求。通过该设计，能够将驾驶室内饰结构件以注塑成型的模式加工生产，提高了生产效率。49454

关键词注塑模具一模一腔工艺分析

毕业论文设计说明书外文摘要

Title Cab machine structural parts injection mold CAD design

Abstract

Injection mold of automobile cab interior structure has been designed and researched in this article. Production process and the specific structure of the structure has been analyzed. Injection mold institutions, systems, such as casting, core pulling and ejection system, forming part of the rationality and practicality，through certain design methods, principles of rational allocation and selection, at the same time, a suitable injection molding machine has been selected, and relevant design parameters above were been detailed checked and correction choiceed. Taking into account the process conditions of injection molding products, the design has been adopted as a way of producing a mold cavity, by the top of the mast, using a spring core pulling structure, its overall reasonableness meet certain requirements. With this design, the cab interior structure can be processed to produce injection-molded model to improve its productivity.

Keywords injection molding One module and one cavity Technology analysis

1 引言 1

1.1 塑料件 1

1.2 注塑成型 2

1.3 选题意义 2

2 塑件注塑工艺的合理性分析 3

2.1 塑件分析 3

2.2 塑件的材料分析 3

2.3 塑料成型工艺性能分析 3

3 注塑模具总体方案 5

3.1 分型面位置的确定 5

3.2 成型腔数的确定 6

3.3 注射成型机的选择 6

3.4 注塑机的校核 8

4 成型零件的设计计算 9

4.1 型腔的结构设计 9

4.2 型芯的结构设计 9

4.3 成型零件工作尺寸的计算 10

5 浇注系统设计 12

5.1 浇口设计 12

5.2 主流道的设计 13

5.3 冷料穴的设计 14

6 顶出系统设计驾驶室内饰结构件注射模CAD设计:http://www.youerw.com/jixie/lunwen_52027.html