摘要：目前，我国正处于经济发展的高峰期，在日新月异的今天，我们对工作效率提出了新的要求，也有了新的认识。在包装工程方面，原来缠绕线束的要么是人工，效率太低并且缠绕效果还不好；要么是一些大型机械，占空间且成本很多。通过对前人著作的研究，设计出一个能自动缠绕线束又能自动切割胶带的设备，而且要轻小、灵便，便于手持。这个机构主要有三大机构，分别为传动机构、胶带缠绕机构和胶带自动切割机构。这个设备开始工作时，需要手拿着手柄，线束插进工作区域内，按动开关，即可开始工作，由于是手持，可以手动控制胶带缠绕速度。缠绕完成后，触动自动切割机构，即可自动切断胶带，方便快捷，同时需要的人力资源也会大大减少，工作效率会大大提高，在实际生产过程中会比较实用。68优尔

毕业论文关键词：手持；线束；缠绕

Research on Handheld Wire Harness Winding Machine

Abstract: At present, China is in the peak of economic development, in the ever-changing today, we put forward new requirements for work efficiency, but also a new understanding. In the packaging engineering, the original winding harness is either artificial, inefficient and winding effect is not good; or some large machinery, accounting for space and a lot of cost. Through the study of previous books, designed to automatically winding the wiring harness and automatic cutting tape equipment, but also to light, flexible, easy to hand. The body has three major institutions, namely, transmission, tape winding mechanism and tape automatic cutting mechanism. When the device starts to work, you need to hold the handle, the harness is inserted into the work area, press the switch, you can start work, because it is hand-held, you can manually control the tape winding speed. After the winding is completed, the automatic cutting mechanism is touched, and the tape can be cut off automatically. At the same time, the human resources will be greatly reduced, the working efficiency will be greatly improved, and it will be practical in the actual production process.

Key words: hand-held; harness; winding

目录

1 绪论 1

1.1 线束缠绕机的国内外发展 1

1.1.1 手持式的线束缠绕机的国内外发展 1

1.1.2半自动式的线束缠绕机的国内外发展 4

1.1.3总结 5

1.2 创新点及难点分析 6

1.2.1 创新点分析 6

1.2.2 难点分析 6

2 线束胶带缠绕机的设计方案 6

2.1 线束缠绕机的工艺流程 6

2.2 设计整体方案 8

3 线束缠绕机结构设计 8

3.1胶带缠绕机构 9

3.2 胶带自动切断机构 9

3.3 传动机构 10

4选型设计 12

4.1传动机构设计 12

4.1.1传动方式的确定 12

4.1.2 齿轮的设计 14

4.1.2.1 齿轮1、3的设计 14

4.1.2.2 齿轮2的设计 18

4.1.2.3 电动机的选型 18

4.1.2.4 螺栓的选择 手持式线束缠绕机研发+CAD图纸:http://www.youerw.com/jixie/lunwen_77430.html