PLC车床上下料机械手设计+CAD图纸
时间:2016-12-18 21:15 来源:毕业论文 作者:毕业论文 点击:次
| 摘要：为了提高生产加工的工作效率，降低成本，并使生产线发展成为柔性制造系统,适应现代自动化大生产，针对具体生产工艺，利用自动化技术，设计用一台装卸机械手代替人工上下料工作，以提高劳动生产率。本机械手主要与数控车床组合最终形成生产线，实现加工过程的自动化和无人化。具体进行了机械手的总体设计，腰座结构的设计，机械手手臂结构的设计，末端执行器（手爪）的结构设计，，机械手驱动系统的设计，机械手的控制方式的设计。通过分析针对主控车床的生产加工过程，拟定了机械手的运动过程，由手部夹紧松开、机械手臂横臂伸缩、机械手立柱升降、机械手立柱旋转4个自由度组成，并且手部夹紧松开、机械手横臂伸缩、机械手立柱升降采用液压驱动，立柱的旋转由步进电机带动旋转。其控制方式采用PLC控制，选用西门子S7-200型，使其能够实现自动夹取工件，并将工件装进车床主轴，并且返回安全位置，待工件加工完成后再将工件取下，放回物料传送带上，以达到设计目的与要求。4522 关键词： 数控车床；机械手；上下料；PLC；液压 Lathe loading and unloading robot Abstract：In order to improve the efficiency of the production and processing, reduce costs and make production line development to become flexible manufacturing system, to adapt to the large modern automated production, the use of automation technology, to design with a loading and unloading mechanical hand instead of manual loading, in order to improve labor productivity. The robot finally forms in combination with the CNC machine tools, production lines, process automation and unmanned. Specifically for the overall design of the robot, back the design of the robot arm structure, the design of the end effector(gripper) structural of the robot mechanical transmission mechanism design, design the robot drive system. Through the analysis of the production process for CNC lathe, prepared a the movement of the robot, clamping release by hand, mechanical arm telescopic arm, the mechanical hand column lift, robot rotating column of four degrees of freedom, and hands’ clamping and releasing, telescoping of arm of the robot, the robot column lift with hydraulic drive, the rotation of the column is rotated by a stepping motor. Its control mode is controlled by PLC, the choice of Siemens S7-200 type, so that it can automatically gripping the workpiece, and the work put into the lathe spindle, and return to the safe location, upon completion of the workpiece before the workpiece go back into the material, conveyor belt, to meet the design objectives and requirements. Key Words: CNC lathe; Robot; Loading and Unloading; PLC; Hydraulic 目 录 1 绪论 1 1.1 工业机械手概况 1 1.2 国内外研究现状和趋势 3 1.3 工业机械手在工业生产中的应用 3 1.4 工业机械手在工业生产中的应用 4 2 设计方案的论证 6 2.1 机械手的总体结构设计 6 2.1.1 机械手总体结构可选用方案比较 6 2.1.2 机械手总体结构具体采用方案 8 2.2 机械手的驱动方式的分析比较 8 2.2.1 机械手的驱动方式方案比较 8 2.2.2 机械手驱动方式的选用 9 2.3 机械手的控制方式的分析 9 3 车床上下料机械手设计计算 11 3.1 机械手夹持器手部结构分析计算 11 (责任编辑：qin) |