毕业论文移动版

摘要六维车轮力传感器测量系统，测试项指标满足SAE 坐标系统的要求。能够快速测量车轮子受到的三方向力和三方向力矩。对轮力传感器的弹性体进行动力学仿真和分析，是研究其可靠性、寻求最佳设计方案的主要手段。由于车轮在行驶过程中载荷情况较为复杂，采用经典力学的计算方法往往有很大的局限性，因此采用有限元方法对车轮力传感器弹性体进行应力及应变分析，确定弹性体的几何尺寸及设计要求。从不同角度对弹性体结构优化展开了研究,优化结果提高了传感器的某些性能指标,而对传感器综合性能指标而言,优化效果并不明显,实用性不高。另外,弹性体结构简化及模型建立对优化结果的影响等方面仍有不少值得商榷的问题。49632

本文以某公司生产的车轮力传感器为研究对象。首先对其进行基于Ansys建模、划分网格、加载分析，在此基础上进行优化设计。其次得出优化结果。从而提高传感器的测量灵敏度。

毕业论文关键词：车轮力传感器；优化设计

Abstract Six D wheel sensors measuring system and test indexes meet the requirements of SAE coordinate system. Can fast measure by three direction of car wheels force and torque three direction. In the round of dynamic force sensor elastomer simulation and is the study of its reliability, seeking the best design program of the main means. Because of the wheel in the course of driving load condition is relatively complex, using classical mechanics calculation method often have a lot of limitation, so finite element method of the sensors in stress and strain analysis elastomer, to determine the geometry of the elastomer size and design requirements. From different angles on the structure of elastomer optimization, and the optimization results improve the performance of some of the sensor, and comprehensive performance index of sensor is concerned, the optimization effect is not obvious, practicability is not high. In addition, simple structure and model elastomer to the effect of the optimization results there are still many questionable problem.

Taking a company's wheel force sensor as the research object. The first based on Ansys modeling, mesh, loading analysis, based on the optimization design. Second that the optimization results. So as to improve the sensor has high measuring sensitivity.

Key words: Wheel force sensor; optimal design

目  录 

第一章 绪论 1

1.1  车轮力传感器 1

1.1.1  车轮力传感器的简介 1

1.1.2  车轮力传感器的用途 2

1.1.3  车轮力传感器研究背景 2

1.1.4  车轮力传感器国外发展情况 3

1.1.5  车轮力传感器国内发展情况 5

1.1.6  本文研究的主要内容 6

1.1.7  车轮力传感器优化意义 6

1.2  有限元 7

1.2.1  有限元的定义 7

1.2.2  有限元法所具有的特点 8

1.2.3  Ansys简介 9

1.2.4  Ansys软件主要功能 10

第二章 车轮力传感器的Ansys建模 11

2.1  弹性体尺寸 11

2.2  定义单元类型 11

2.3  定义材料属性 (责任编辑：qin)