菜单
  

    摘要本毕业设计工程为镇江新区高校食堂,采用框架结构,主体为三层,本地区抗震设防烈度为7度,场地类别为II类场地。基本风压0.40KN/M,基本雪压0.25 KN/M。楼﹑屋盖均采用现浇钢筋混凝土结构。

    本设计贯彻“实用、安全、经济、美观”的设计原则。按照建筑设计规范,认真考虑影响设计的各项因素。根据结构与建筑的总体与细部的关系。

    本设计主要进行了结构方案中横向框架第6轴抗震设计。在确定框架布局之后,先进行了层间荷载代表值的计算,接着利用顶点位移法求出自震周期,进而按底部剪力法计算水平地震荷载作用下大小,进而求出在水平荷载作用下的结构内力(弯矩、剪力、轴力)。接着计算风荷载作用下结构内力,接着计算竖向荷载(恒载及活荷载)作用下的结构内力。找出最不利的一组内力组合。 选取最安全的结果计算配筋并绘图。此外还进行了结构方案中的室内楼梯的设计。完成了平台板,梯段板,平台梁等构件的内力和配筋计算及施工图绘制。对楼板进行了配筋计算,本设计采用独立基础,对基础承台进行了受力和配筋计算。

    整个结构在设计过程中,严格遵循相关的专业规范的要求,参考相关资料和有关最新的国家标准规范,对设计的各个环节进行综合全面的科学性考虑。总之,适用、安全、经济、使用方便是本设计的原则。设计合理可行的建筑结构方案是现场施工的重要依据。 50948

    毕业论文关键词: 框架结构,抗震设计,荷载计算,内力计算,计算配筋 

    Abstract This works for Zhenjiang New Area college canteens building, a framework structure for a three-storey main, in the region earthquake intensity of 7 degrees near Lan site classification as Class II venues. the basic Pressure 0.40 KN / M, basic snow pressure 0.25KN/M. Floor roof were using cast-in-place reinforced concrete structure.

    The design and implement "practical, security, economic, aesthetic," the design principles. With the architectural design, design seriously consider the influence of the various factors. According to the structural and architectural detail and the overall relationship.

    The design of the main structure of the program horizontal framework 6-axis seismic design. In determining the distribution framework, the first layer of representative value of the load, Then use vertex from the displacement method for earthquake cycle, and then at the bottom of shear horizontal seismic load calculation under size, then calculated the level of load under the Internal Forces (bending moment, shear and axial force). Then calculate vertical load (constant load and live load) under the wind Forces. Then calculate vertical load (constant load and live load) under the tnteral Forces.Identify the most disadvantaged group or an internal force several combinations. Select the best safety results of the reinforcement and Mapping. In addition, the structure of the program indoor staircase design. Completion of the platform boards, boards of the ladder, platform beam component and the reinforcement of internal forces calculation and construction mapping. On the floor reinforcement calculation, the use of Independent foundation  design, foundation caps for the force and reinforcement calculation. 

    The whole structure of the design process, in strict compliance with the relevant professional standard, reference to relevant information and the latest national standards and specifications, and design of the various components of a comprehensive scientific considerations. In short, application, security, economic and user-friendly design is the principle. Design reasonable and workable structure of the program is the construction site of the important basis for the construction.

     KEY WORDS:Frame Structure,Seismic Design ,Load Calculation,  Internal force calculation, Calculation reinforcement 

  1. 上一篇:北方山区二级公路设计+CAD图纸
  2. 下一篇:熊猫电子集团有限公司办公楼基坑支护设计+CAD图纸
  1. 镇江市某国际贸易中心设计说明

  2. 镇江市特教中心规划与设计绿色生态化设计

  3. 镇江市特教中心规划与设计

  4. 镇江市特教中心单体规划与设计

  5. 镇江市某住宅楼工程计价与BIM应用

  6. 镇江某酒店暖通空调系统设计+CAD图纸

  7. 镇江海绵城市建设的居住区景观设计

  8. 江苏省某高中学生体质现状的调查研究

  9. NFC协议物理层的软件实现+文献综述

  10. C++最短路径算法研究和程序设计

  11. 中国传统元素在游戏角色...

  12. 高警觉工作人群的元情绪...

  13. 上市公司股权结构对经营绩效的影响研究

  14. g-C3N4光催化剂的制备和光催化性能研究

  15. 浅析中国古代宗法制度

  16. 现代简约美式风格在室内家装中的运用

  17. 巴金《激流三部曲》高觉新的悲剧命运

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回