菜单
  
    本论文对采用高能球磨法制备的金属燃料在冷焰火配方中的燃烧光色性能进行研究。制备金属燃料的设备为 QM-3SP4 行星式球磨机,制备工艺为:250ml 不锈钢球磨罐,物料 50g,球料比 4:1,转速 250r/min,球磨时间 4~6h;共制备各种配比的铁钛合金、铁铋合金、钛锌合金、铁镍合金等 27种。采用 XRD分析了金属燃料的晶型、并采用玻璃量筒法测试其装填密度。检验金属燃料光色性能的冷焰火常用配方进行混药,金属粉需预先使用粘结剂进行造粒。实验结果显示,采用金属 粉配制的冷焰火燃烧 光强 0-100cd ,燃温 480-1000 ℃ ;燃速0.2-0.6g.cm-2
    s-1,呈现出金黄色,银白色,紫色,蓝色,红色等燃烧光色。  7610
    关键词  金属燃料  高能球磨  冷焰火  彩光  
    Title  Preparation and photochromism performance of the multicolour metal fuel                         
     Abstract
    The cold fireworks formulations prepared by high energy ball milling of
    metal fuel in the combustion performance of light and color research.
    Equipment for the fabrication of metal fuel QM-3SP4 planetary ball mill,
    the preparation process: 250ml stainless steel milling pot material 50g
    ball to powder ratio of 4:1, speed 250r/min, milling time 6h; total
    preparation of various proportions of iron titanium, iron, bismuth alloys,
    titanium, zinc alloy, iron-nickel alloy and other 27 kinds. By XRD analysis
    of the crystal form of the metal fuel, and glass graduated cylinder method
    to test its packing density. Test the performance of metal fuel light color
    cold fireworks commonly used formula for mixing drugs, the metal powder
    in advance to use the binder for granulating. The experimental results show
    that the combustion of metal powder prepared cold fireworks light intensity
    0-100cd, fuel temperature 480-1000 ℃; burning rate of 0.2-0.6g.cm-2s-1,
    showing the golden, silver and white, purple, blue , red and burning a light color.
     Keywords   metal fuel  high energy ball milling  Cold fireworks Colorama
     目   次
     
    1  绪论   1
    1.1  背景与意义  .  1
    1.2  国内外研究现状  .  1
    1.2.1  有色光烟火药剂的研究 .  1
    1.2.2  金属燃料的研究 .  2
    1.3  本文研究工作  .  3
    本章参考文献    4
    2  在空气中燃烧发光的金属燃料的功能设计   5
    2.1  发光学原理  .  5
    2.2  金属的可见光发射性能数据  .  8
    2.3  彩光金属燃料的设计  .  9
    2.4  本章小结  .  9
    本章参考文献  .  10
    3  在空气中燃烧发光的金属燃料的制备方法设计 .  11
    3.1  合金粉体的制备方法    11
    3.2  机械合金化制备合金粉的方法    11
    3.3  设计制备工艺    13
    3.4  本章小结    14
    本章参考文献  .  15
    4  在空气中燃烧发光的金属燃料的制备 .  16
    4.1  设备与原材料    16
    4.2  制备工艺    17
    4.3  性能表征    17
    4.4  本章小结    18
    5  光色性能的检测 .  19
    5.1  检测方法    19
    5.2  实验结果与分析    20
    5.2.1  造粒金属试样的光色性能   20
    5.2.2  未造粒金属试样的光色性能   24
  1. 上一篇:电火工品空气炮过载实验评估技术研究
  2. 下一篇:铜含量对水热合成Cu-MCM-41介孔分子筛物性参数的影响
  1. 不同温度生物炭对重金属...

  2. 金属有机框架MIL-100(Fe)的金...

  3. 复合金属氧化物Fe2O3NiO及...

  4. 海藻酸钠+壳聚糖固定化微...

  5. 超微金属电极的制备和电化学研究

  6. 多酸基金属Ni2+Ag+Co2+配合物...

  7. 氰基金属骨架的Fe3O4-NiO的...

  8. 上市公司股权结构对经营绩效的影响研究

  9. NFC协议物理层的软件实现+文献综述

  10. 江苏省某高中学生体质现状的调查研究

  11. g-C3N4光催化剂的制备和光催化性能研究

  12. 现代简约美式风格在室内家装中的运用

  13. 浅析中国古代宗法制度

  14. C++最短路径算法研究和程序设计

  15. 高警觉工作人群的元情绪...

  16. 巴金《激流三部曲》高觉新的悲剧命运

  17. 中国传统元素在游戏角色...

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回