P090柱塞泵出厂试验台液压系统设计论文+CAD图纸
关键词：柱塞泵；液压系统；试验台；功率回收4115
Hydraulic System Design of Piston pump Test Bench
Abstract：This article for the P090 test piston pump, design of test bench hydraulic system. The hydraulic system needs to be done is the volumetric efficiency of the pump and the total efficiency of the test, and can be tested within the range of variation of the speed, pressure, displacement. At the same time to control fluid temperature in the appropriate range. The system consists of flushing the loop, test circuit and auxiliary circuits. The loop flushing to clean the pump before the experiment is to test loop can be divided into the voltage regulator circuit, fill oil loop control system pressure and flow is mainly used in the test, the auxiliary circuit is used to control the temperature of the hydraulic fluid and maintain oil cleaning, to ensure the normal operation of the system. The principle and method to realize power recovery for the test-bed were introduced the of the recovery was analyzed. Finally to design the integrated block and the hydraulic oil tank.
KeyWords：Piston pump；Hydraulic system；Test bench；Power recovery
目 录
前 言
1 概述 1
1.1 试验台的组成 1
1.2 液压泵、马达试验台技术概况 1
1.2.1 测试主要内容以及试验台相关条件要求 2
1.2.2 试验台液压系统部分现状 2
1.2.3 液压试验台节能方面的研究 3
1.2.4 液压系统数字化、比例化 3
1.3 液压CAT技术 5
1.3.1 采用液压CAT技术提高试验台的性能 5
1.3.2 液压CAT系统的组成 5
2 选题背景和意义 6
2.1 选题背景 6
2.2 选题目的和意义 7
3 设计参数 7
4 设计任务及设计的关键问题 8
5 系统整体设计 9
5.1 液压系统设计 9
5.1.1 动力驱动部分设计 9
5.1.2 液压泵加载部分设计 9
5.1.3 其他辅助部分设计 11
5.2 微机测控系统设计 11
5.3 功率回收设计 12
5.3.1 机械补偿功率回收 12
5.3.2 液压补偿功率回收 15
5.3.3 功率电回收 15
6 液压系统设计 15
6.1 液压系统设计 15
6.2 功率回收设计 16
6.2.1 测试回路设计 16
6.2.2 补油回路设计 18