摘要车用压缩天然气 CNG(compressed natural gas)与常规石油燃料相比,其化学性质稳定,火焰传播速度较慢,在气缸内燃烧时平均有效压力低,并会产生局部热负荷较高,热效率低下等不良结果。因此,必须对天然气在缸内的燃烧过程进行研究,以期望改善燃烧过程,提高发动机性能。文章利用CFD软件 Fluent对一台改装的 CA20 型天然气发动机缸内的压缩、燃烧和膨胀过程进行了二维的数值模拟,对缸内气体的气相湍流流动模型,缸内火花塞点火模型、燃烧模型在理论上进行具体的分析。在压缩比ε=8 时,对不同点火正时和不同空燃比的燃烧过程进行计算比较,根据各种情况下缸内CH4浓度场和温度场的分布情况,研究点火提前角和空燃比对燃烧过程的影响。研究结果表明:在适当范围内,增大点火提前角火焰传播速度增加,燃烧过程温度增高,气缸内压力变大;增大空燃比可燃混合气燃烧过程速度减慢,缸内温度、压力均下降。 61027    
毕业论文关键词  发动机 数值模拟 点火提前角 空燃比   Title      Numerical Simulation Of Combustion Process nside  of The Engine Cylinder               
Abstract Compared with traditional oil fuel, compressed natural gas (CNG) used in vehicle has Chemical properties of stability, its flame has a slow speed of spread, and the mean effective pressure is low in the cylinder. High heat load in some parts of the space and low  heat efficiency  can be caused. Study on the combustion process of the CNG in cylinder is needed. It is expected  to improve the combustion process and  the performance of engine.The CFD software Fluent is used for 2D and 3D numerical simulation for the process of compression, combustion and expansion in the cylinder of  a modified CA20 natural gas  engine  in the thesis. The  gas phase turbulent flow model, the spark ignition model in cylinder and combustion model are  analysed in theory. When the ratio of the compression is 8, different combustion  process in different spark ignition time and different air-fuel ratio  are Compared with each other.  The  distribution of concentration field of CH4 and the distribution of temperature field in cylinder in different conditions are displayed to find the influence of the spark ignition time and air-fuel ratio to combustion process. The results show that:  in appropriate range, with the increase of ignition advance angle, speed of flame propagation can be increased, the combustion temperature and the pressure in the cylinder can be higher; with the increase of the air-fuel ratio, combustion process is slowed down, temperature and pressure in cylinder is decreased.
Keywords  engine numerical simulation ignition advance angle air-fuel            Ratio 

目次

1绪论..1

1.1课题背景.1

1.2天然气发动机简介.2

1.3本文主要研究内容4

2发动机汽缸建模..6

2.1发动机物理模型6

2.2基本控制方程...9

2.2.1质量守恒方程....9

2.2.2动量守恒方程....9

2.2.3能量守恒方程....9

2.2.4组分守恒方程..10

3数值模拟分析....11

3.1数值模拟技术的发展....11

3.2Fluent计算条件设置...12

3.3计算模型选择.13

3.3.1湍流模型13

3.3.2化学反应模型..15

3.3.3点火模型16

3.4动态网格设置.16

3.4.1动态网格更新方法....17

3.4.2计算步长19

4模拟结果分析....21

4.1点火提前角对燃烧过程影响...21

4.2空燃比对燃烧过程的影响.24

结论....28

致谢....29

上一篇:冲压增程弹丸气动及结构设计
下一篇:单级压缩轻气炮内弹道性能分析及参数设计

LNG/柴油双燃料发动机喷油策略选择

LNG发动机用水浴式LNG气化装置研究

FLUENT通风机的振动噪声分析与控制

ANSYS发动机连杆胀断机机架...

ANSYS四缸发动机活塞的强度校核

Fluent省煤器换热管内流固耦合模拟

ANSYS发动机连杆静态与动态...

LiMn1-xFexPO4正极材料合成及充放电性能研究

麦秸秆还田和沼液灌溉对...

安康汉江网讯

网络语言“XX体”研究

张洁小说《无字》中的女性意识

我国风险投资的发展现状问题及对策分析

老年2型糖尿病患者运动疗...

新課改下小學语文洧效阅...

ASP.net+sqlserver企业设备管理系统设计与开发

互联网教育”变革路径研究进展【7972字】