摘要:EHD(electro hydrodynamic)强化沸腾换热是指在流体中施加一电场,利用电场、流场和温度场三者之间的耦合作用达到强化沸腾换热的目的。由于EHD技术具有强化效果显著、设备简单、容易控制热流和温度、功耗低、应用面广等优点,从而引起了科研人员和工程技术人员的广泛兴趣。本论文主要研究在外加电场作用下,换热系数随电场强度的变化关系,以及讨论了电场强化传热的原理和各因素对EHD强化沸腾换热的影响。利用EHD技术进行了工质R123的池内平板沸腾强化传热实验研究。在该实验中,换热面为一平板并接地作为0电极,高压电极为平行于换热面的网状电极。实验结果表明电压越高,强化效果越好。5956
关键词:电场;沸腾换热;强化换热;R123工质;均匀电场
EXPERIMENTAL STUDY 0F POOL BOILING HEAT TRANSFER ENHANCEMENT UNDER ELECTRIC FIELD
Abstract:EHD(electro hydrodynamic)Enhanced boiling heat transfer is refers to applying an electric field in the fluid,and uses an electric field, flow field and temperature field coupling between roles to achieve the purpose of enhanced boiling heat transfer.Because of the EHD technique has obvious strengthening effect, simple equipment,easy control of heat flow and temperature,and the advantages of low power consumption,wide application,which caused a wide interest in scientific research personnel and engineering technical personnel.This article mainly research the relationship of heat transfer coefficient along with the change of electric field intensity under the effect of applied electric field,and discusses the electric field strengthening heat transfer principle and the effects of the various factors on EHD enhancement of boiling heat transfer.The experiment study of EHD enhancement of pool boiling heat transfer from a horizontal plate with R123 was presented in this paper.A pair of parallel electrodes were used in this experiment,in which high voltage was applied on the upper straight net electrode while the lower heat transfer surface was earthed.
Key words:electric field;boiling heat transfer;heat transfer enhancement;uniform electric field
目 录
1 绪论    1
1.1 选择该课题的依据及研究意义    1
1.1.1 全球能源正面临的危机    1
1.1.2 强化沸腾换热是积极有效的手段    2
1.2 国内外研究历程    3
2     EHD强化传热的原理    10
2.1 电场强化传热的原理    10
2.2 各因素对EHD强化沸腾换热的影响    11
2.2.1 电场特性对EHD强化沸腾换热的影响    11
2.2.2 工质性质对EHD强化沸腾换热的影响    13
2.2.3 热流密度对EHD强化沸腾换热的影响    15
2.3 电场对沸腾换热的作用    16
2.3.2 电场对起沸点的影响    17
2.3.3 电场在沸腾各阶段的作用    18
3 试验系统及试验方案    20
3.1 概述    20
3.2 试验系统    20
3.2.1 实验装置    20
3.2.2 测试部件    24
3.3 工质R123的性能    26
3.4 试验方案的确定    27
3.4.1 试验台的安全性    27
3.4.2 正式试验    28
3.4.3 试验操作中的注意事项    28
3.5 数据处理    29
3.6 试验误差及不确定度分析    30
3.6.1 误差分析    30
3.7 均匀电场对池沸腾的强化效果    33
4 结论    35
致谢    36
参考文献    37
1 绪论
上一篇:光电薄膜的制备及其光电性质的研究
下一篇:螺旋套管式钎焊板式和周向重叠螺旋折流板热交换器试验性能研究

地质勘探单位绩效管理强化研究【1852字】

变电场对Cu/Ta/Si互连结构界...

ANSYS+R410A工质作用下电场对气泡的作用

有限元法结合区域分解法分析静电场问题

高压输电线路周围工频电场畸变规律研究

考虑材料强化和包辛格效...

外电场中螺旋波的演化

中国学术生态细节考察《...

志愿者活动的调查问卷表

医院财务风险因素分析及管理措施【2367字】

公寓空调设计任务书

AT89C52单片机的超声波测距...

10万元能开儿童乐园吗,我...

承德市事业单位档案管理...

C#学校科研管理系统的设计

国内外图像分割技术研究现状

神经外科重症监护病房患...