毕业论文移动版

摘要本次滚动轴承故障试验台设计要求有以下几点：1、设计完成模拟滚动轴承故障的实验平台；2、完成轴承、轴承座基本参数的绘制；3、完成整个平台各部分零件的确定；4、该平台可以模拟几种典型的滚动轴承故障，通过几种典型故障轴承更换，实现对故障的模拟和检测。74039

本平台重点设计了疲劳脱落、磨损、塑性变形、腐蚀四种典型的轴承故障，通过模拟这四种典型故障轴承，实现对故障的模拟和检测。并且本平台还有以下几个创新点：1、轴承座易于拆卸，能对不同故障的轴承进行实验;2、轴转速可调，目的是研究转速对滚动轴承故障诊断的影响;3、试验台的设计使其能方便地安装上振动、速度、力等传感器以便真实地获得试验信号。

该论文有图28幅，参考文献30篇。

毕业论文关键词：滚动轴承  故障诊断  模拟  检测

The design of the rolling bearing fault test bench

Abstract In the design of the rolling bearing fault test bench , there are some following requirements : 1、Design the rolling bearing fault test bench；2、Complete the drawing of parameters about the bearings and the bearing basic；3、Determine the various parts of the platform；4、The platform can simulate several typical faults of rolling bearings and achieve the fault simulation and testing by replacing several typical faults bearing 。

The design of the platform focus on four typical bearing failure about fatigue, wear, plastic deformation and corrosion, achieve fault simulation and testing by simulating these four typical bearing failure。 And there are several innovations in this platform：1、The Bearing basic is easy to disassemble, and can do experiment of the different bearing fault；2、The speed of shaft is adjustable, the aim of it is to study the impact on the speed of rolling bearings faults；3、Test bench is designed so that it can be easily mounted on vibration, speed, power and other sensors in order to obtain a true test signals。

There are 28 figures and 30 references in this paper。

Key Words: rolling bearing  Fault diagnosis  simulation  detection

目  录

摘要 I

Abstract II

目  录 III

1 绪论 1

1。1滚动轴承故障诊断的意义 1

1。2滚动轴承故障演化 1

1。3滚动轴承故障诊断的基本环节 2

1。4滚动轴承故障诊断技术的发展趋势 3

2 滚动轴承故障机理 5

2。1滚动轴承故障的表现形式 5

2。2滚动轴承故障产生的原因及改进措施 7

2。3滚动轴承故障的检测方法 15

3 滚动轴承故障试验台设计 19

3。1滚动轴承故障试验台总体设计 19

3。2电机的选型 19

3。3传动元件的选择 21

3。4轴的选型 24

3。5键的选型 25

3。6联轴器的选型 26

3。7滚动轴承的选型 27

3。8滚动轴承座的设计 29

3。9制动器的选型 (责任编辑：qin)