- 上一篇：1,10-邻菲罗啉-5,6二酮及其单双核含铕配合物的合成与发光性能研究
- 下一篇：含氢硅油的合成与性能研究
摘要本次毕业设计为年产120万吨双机架可逆中厚板轧机车间设计，结合本次任务书所给予的条件以及所要求的年产量，制定完成2个产品品种、2个产品规格的金属均衡表和产品方案。计算产品为Q235，规格为40 X4000占年产量的33.2%。主要包括编制本设计的金属均衡表及产品大纲。制定产品方案和生产工艺流程；设计压下规程并对压下设备进行选取；绘制轧机车间平面的布置，并对设备的间距、生产流程、速度、温度制度进行确定；计算力学性能并校核轧辊和电动机以保证设备选取的合适度。最后根据上述计算所得绘制出适合本次设计的车间平面布置。48227
毕业论文关键词：中厚板；工艺设计；力能参数
Abstract
This design that take the Tangshan area as a condition, has designed the annual yield of 1.2 million tons new medium and heavy plate factory.Combined design conditions and the requirements of annual yield, the design completes 2 product varieties, 2 product specifications and metal balance sheet table. Computing products for Q235, specifications for 40×4000 mm accounted for 33.2% of output.
Main content includes analysis of the construction of new plate mill in tangshan region of the feasibility and necessity; Determine the outline of the design of products and the preparation of metal sheets; To develop product solutions and production process; Under the design pressure regulation system under the pressure, velocity, temperature, for sure; The calculation and draw rolling chart for workshop production; Force parameters can be calculated, including the calculation of rolling pressure, the selection of motor and checking, roll strength check; The selection of auxiliary equipment; Determine the spacing of workshop layout, equipment, production flow and the calculation of the facilities area, etc; According to the design parameters, draw out the workshop floor plan.
Key words: medium plate ； Process design； Can force parameters
目录
1 前言 1
1.1 工程总述 1
1.2 中厚板的用途 1
1.3中厚板的市场前景和需求概况 1
1.31 中厚板的市场前景 1
1.32中厚板的市场需求 1
1.4中厚板的发展趋势 2
1.5总结 2
2 确定产品大纲和编制金属平衡表 3
2.1 生产规模 3
2.2产品大纲的编制 3
2.2.1产品方案的编制原则 3
2.2.2 产品大纲及其主要内容包括 3
2.3产品方案 3
2.3.1生产品种 3
2.4 原料及金属平衡表的编制 4
2.4.1 原料来源及规格 4
2.4.2 编制金属平衡表 4
2.5 典型产品介绍 5
3 中厚板生产工艺 7
3.1轧机 7
3.1.1类型和布置形式的确定 7
3.1.2轧机的主要技术参数确定 8
3.1.3 生产工艺流程制定 11
3.2产品的工艺设计 12
3.2.1 坯料