摘要细菌纤维素晶须(BCW)是细菌纤维素(BC)的衍生物,具有高结晶度、高聚合度、高持水量、高拉伸强度和生物相容性等优点,可作为功能填料用于补强高分子材料。本文采用硫酸水解法制备出长径比为80,结晶度指数93。3%的BCW,并选用丁苯橡胶(SBR)、羧基丁腈橡胶(XNBR)和天然橡胶(NR)作为基体,采用蒸发法制备BCW/橡胶复合材料薄膜,探究了胶种对BCW/橡胶复合材料薄膜水溶胀性能、水刺激-力响应性能、降解等性能的影响。结果表明:SBR复合膜的平衡溶胀率高达70%,远高于XNBR和NR复合膜;三种基体中, SBR和NR复合膜的水刺激-力响应性能好,其中NR复合膜的重复使用性能较好;另外, SBR和NR复合膜的降解速度比XNBR复合膜更快。76976

毕业论文关键词  细菌纤维素晶体 功能橡胶 水刺激-力响应性能

毕业设计说明书外文摘要

Title    The effect of the different rubber matrix on the properties of BCW/rubber films                   

Abstract As one of the derivatives of bacterial cellulose (BC), bacterial cellulose whisker (BCW) is qualified with high crystallinity, high degree of polymerization, high water holding capacity, high tensile strength and biocompatibility。 Thus, it is used as an ideal candidate for reinforcing polymer。 In this work, the BCW, consists of rod-like nanofiber with great aspect ratio of 80 and 93。33% crystalline, was prepared via sulfuric acid hydrolysis。 Styrene butadiene rubber (SBR), natural rubber (NR) and carboxylated acrylonitrile butadiene rubber (XNBR) were chosen as matrixes to prepare BCW/rubber films via evaporation。 The effects of different rubber matrix on the water swelling property, water-stimuli mechano-responsive property and degradation property were discussed。 The results showed that when 10 份 BCW was incorporated, the equilibrium swelling ratio of BCW/SBR films was 70%, which was higher than other films。 The water-stimuli mechano-responsive property of BCW/SBR films and BCW/NR films were more excellent and the reusability of BCW/NR films was the best among three rubber。 In addition, the degradation rate of BCW/SBR films and BCW/NR films were higher than that of BCW/XNBR films。

Keywords: bacterial cellulose whisker, mutifunctional rubber, water-stimuli mechano-responsive property

目   录

1  引言 1

1。1  细菌纤维素(BC) 1

1。2  细菌纤维素晶须(BCW) 2

1。3  BC和BCW在聚合物中的应用 3

1。3。1  生物医用材料 3

1。3。2  食品行业 3

1。3。3  纺织行业 3

1。3。4  聚合物材料增强领域 3

1。4  智能材料 4

1。5  本课题的研究意义和主要内容 4

2  实验部分 6

2。1  仪器与药品 6

2。1。1  实验药品 6

2。1。2  实验仪器 6

2。2  BCW及BCW/橡胶复合材料薄膜的制备 6

2。2。1  BCW的制备 6

2。2。2  BCW/橡胶复合材料薄膜的制备 6

2。3  表征与测试

上一篇:高透明性无色聚酰亚胺的制备与性能
下一篇:内酯香料的重要前体物4-羟基癸酸盐制备与表征

多巴胺的自聚及其对碳纳米管的改性

Cu(Ⅱ)催化不对称1,4-还原...

余杭塘河水质调查与评价

Cu催化不对称1,4-还原N-芳基...

单独复合SCN-负荷冲击水力...

不同类型絮凝剂对造纸废水COD处理效果研究

生态浮床对河道底泥理化性状的影响

LiMn1-xFexPO4正极材料合成及充放电性能研究

网络语言“XX体”研究

新課改下小學语文洧效阅...

老年2型糖尿病患者运动疗...

张洁小说《无字》中的女性意识

ASP.net+sqlserver企业设备管理系统设计与开发

互联网教育”变革路径研究进展【7972字】

麦秸秆还田和沼液灌溉对...

安康汉江网讯

我国风险投资的发展现状问题及对策分析