摘要拖曳线列阵声呐(以下简称拖线阵)作为拖曳声呐中的一种,用线列阵型式,将一定间隔的水听器,放置到具有中性浮力的透声保护导管内。拖线阵的声学段前后,分别有仪表段、数字段、隔振段、稳定尾绳和拖缆等。拖线阵声呐在探测性能上,具有声阵孔径大、探测距离远、工作频率低,声阵配置不受舰体安放空间的限制等优势。由于我国海上运输事业的蓬勃发展以及海上设施的大规模建设,拖线阵拖曳绞车作为拖船的主要设备,得到了广泛的应用。 

为了适应现代机械自动化的需要,本文提出一种电液控制的拖线阵拖曳绞车,将比例多路阀和可编程序控制器(PLC)应用于拖曳绞车的控制系统。通过合理的设计和选择,该设计不但提高了拖曳绞车的可靠性、可维护性以及灵活性,而且延长了绞车的使用寿命,缩短了绞车的开发周期。于此同时本次设计的绞车系统提高了拖曳控制水平,改善了拖曳运行的操作性能,使的操作更加人性便捷。50895

本课题针对电液控制绞车的结构特点,深入分析了电液比例控制系统的构成,建立了泵控马达液压绞车的液压系统,编写了基于PLC的控制算法。本文重点分析了拖曳绞车电液控制系统的硬件设计和软件设计,研究并提出了基于PLC绞车电液比例控制设计的实现方案,最后对本论文的研究内容进行了总结。

毕业论文关键词:电液比例控制;比例多路阀;PLC;绞车

Abstract Towed line array sonar (hereinafter referred to as the towed linear array) as one of the towed sonar, and array type with lines, to a certain interval of hydrophone, placed in a neutral buoyancy entrant acoustic protection. Towed line array acoustic before, during and after the period of the meter, digital section respectively, isolation period, and stable tail rope and towing and so on. Towed line array sonar on the detection performance, with large acoustic array aperture, detection distance, low working frequency, acoustic array configuration is not restricted by hull put space etc advantages. Due to the rapid development of our country Marine transportation enterprise and offshore facility of large-scale construction, towed line array as tugboat towing winch main equipment, has been widely used.

In order to meet the need of modern machinery for automation, this paper proposes a towed line array towing winch, electric hydraulic control proportional cult-way valve and programmable controller (PLC) is applied to the towing winch control system. Through the reasonable design and selection, the design not only improves the reliability and maintainability of the towing winch and flexibility, and prolongs the service life of the winch; shorten the development cycle of the winch. At the same time the design improves the towing winch system control level, improve the operating performance of towing operation, make the operation more convenient and Human nature.

 This topic according to the structure characteristics of the electro hydraulic control winch, in-depth analysis of the composition of electro-hydraulic proportional control system, established the pump motor control of the hydraulic winch hydraulic system; write the control algorithm based on PLC. This paper mainly analyzes the towing winch electric hydraulic control system hardware design and software design, research and winch electro-hydraulic proportional control design based on PLC is put forward the implementation of the plan, finally the research content of this paper is summarized.

Key words: electric hydraulic servo control; Proportional cult-way valve; PLC; winch

目录

第一章 绪论 1

1.1绞车概述 1

1.1.1  绞车的发展历史

上一篇:Solidworks具有有载同步脱钩功能的救生艇艇钩设计+CAD图纸
下一篇:PLC机加工生产线动力头电液控制设计+CAD图纸

PLC技术茬机械电气控制装...

PLC实现变频调速器多电机控制【1157字】

PLC茬冰蓄冷中央空调系统...

PLC的TIG氩弧焊电弧高度跟踪控制技术

LTCC自动下料机设计+PLC梯形图

PLC高速玻镁板生产线设计原料配料搅拌装备

PLC疏浚切削实验平台控制系统的设计+CAD图纸

AT89C52单片机的超声波测距...

承德市事业单位档案管理...

公寓空调设计任务书

医院财务风险因素分析及管理措施【2367字】

C#学校科研管理系统的设计

10万元能开儿童乐园吗,我...

志愿者活动的调查问卷表

国内外图像分割技术研究现状

神经外科重症监护病房患...

中国学术生态细节考察《...